NEWS & BLOG

September 6, 2018

SC902 is a low VOC, one coat, high build system, based on patented technology. It provides a fast cure effective structural fire performance, for steelwork, up to a 120 minute fire rating.

September 5, 2017

Structural steel fire protection - Nullifire SC902
Finish #1, 2 & 3.
Finish #3 is a high end architectural finish achieved by sanding and applying a thin top coat of intumescent paint. These samples below have also been finished off with a white topcoat.
If you require a quotation on structural steel protective coatings please contact us today! 

Sales@australianfirecontrol.com.au
08 9399 6957
www.australianfirecontrol.com.au

#fire #steel #perth #designwa #afc #fireproof #coatings #perthbuilds #buildingw...

July 17, 2017

ResCom BP NON COMBUSTIBLE (Class O/A1) ARCHITECTURAL SYSTEMS & SOLUTIONS DELIVER FLAIR & PROTECTION IN A SINGLE MULTIFACETE TESTED & ENGINEERED EXTERIOR & INTERIOR FLAT SHEET: 8yrs of value engineering & commitment to deliver the building industry with a suite of high performance value adding products now allows the architectural & building industry the ability to eliminate many of those costly multilayered systems without losing any of the design elements & protection. ResCom's unique product ranges...

July 12, 2017

Passive Fire Protection

Fully DTS Tested Systems with concise construction details contained within Reports from a Registered Testing Authority. 

Exova Report RIR 27186 ID H39 (A): Aperture Seal above a 2HR FR Plasterboard Ceiling, seal size 1.2m x 0.6m using 2 Layers of TBA Firefly Intubatt. 

Exova Report RIR 34088500: All services contained within Table 6, Table 8, Table 8a and Table 8b may pass through H39 (A) 

Spacing between Services must be a minimum of 40mm 

FRL-/120/120 

Contact us today: 

Australia...

May 4, 2017

Due to the nature of the CF210® resting on the bottom flange of the ASB and encasing the beam in concrete (leaving only the underside of the bottom flange exposed) the beam is provided with a degree of fire protection. This level is detailed in the Fielders Fact File F.3.5 – Asymmetric Beams for SlimFlor® Construction. To achieve higher levels of fire protection the bottom flange can be painted with an intumescent paint or covered with fire rated boards or vermiculite sprays.

May 2, 2017

Intumescent Paint Fire Rated Coating Systems for Structural Steel. Australian Fire Control is a qualified applicator of 1120 PRODUCT DESCRIPTION Supplied/Installed/Certified/Maintained 

Interchar 1120 Thin film water-borne intumescent coating optimized for 90 and 120 minutes fire resistance  

1120 A single component, borate and chlorine free, water borne intumescent coating designed for on-site application to interior exposed structural steel requiring protection from cellulosic fire. Interchar 1120...

April 21, 2017

Fibershield S fire curtain protects WITHOUT the need for CORNER POSTS giving architects, consultants and specifiers a whole new way to approach buildings design.

Fire Curtains are designed as barriers to prevent the spread of fire in accordance with AS1530.4

The Fibershield - S concertina type fire curtain was invented by Stoebich Brandschutz GmbH in 2007.

So why the Fibershield - S ? While others have tried their best to copy this system. They have missed the detail. The important details, that give yo...

Please reload

Australian Fire Control offer a large versatile range of specialist fire, smoke & ballistic resistant systems tested
and certified to Australian Standards. 

Western Australian

Head Office

Phone: 9399 6957

Address: 17 Williams Road Kelmscott WA 6111
Postal: PO BOX 1008 DC Kelmscott WA 6997
Email: Sales@AustralianFireControl.com.au

  • LinkedIn Social Icon
  • Facebook Social Icon
  • Google+ Social Icon
  • YouTube Social  Icon
  • Instagram Social Icon